Latest revision as of 16:35, 27 April 2024

This section assumes that you're starting out with nothing besides a desktop computer, an internet connection, and a drive to program some SourceMod plugins. No programming experience; no problem.

This page will walk you through manually installing the dedicated server software for your desired game, installing SourceMod, and selecting a text editor to use for development.

There are a number of third-party tools that can automate most of these steps, but we'll stick to the first-party approach here to avoid abstractions from breaking under you.

If you are using a third-party tool to manage your server installation, refer to the tool's documentation for their instructions, then skip to Installing SourceMod to download the scripting toolchain for your desktop operating system.

Installing the Server

Note:

While officially unsupported, SourceMod may be loaded on a game client (the game you launch); the server a game client creates is known as a listen server. However, there are many behavioral quirks that can only be reproduced on a listen server, and you likely won't receive any solutions to those issues that aren't "use a dedicated server".

This guide does not provide instructions to load SourceMod on a game client. It's highly recommended to stick to installing SourceMod on dedicated game server instances to ensure that any plugins you write will have the correct behavior.

To install the dedicated server software for the game of your choice, we will use steamcmd. If a game server provider (GSP) is hosting the server for you, skip this step as your provider has already provided you with an installation; if you are using a self-hosted game server management panel, refer to the instructions for your software of choice to install your game server in place of this step.

steamcmd is Valve's command-line Steam client. It is used to install and update dedicated game servers.

Refer to the SteamCMD entry in the Valve Developer Wiki for download instructions. This varies on the operating system you're running the software on; you can either work on your own desktop or have a hosted (physical or virtual) machine off-premises.

Once steamcmd is extracted, you will need to install a game server. Continue reading the above wiki page to run the application, sign in (anonymously), and download your game server.

You will need the AppID of the game's dedicated server to install it; note that it is different from the game client AppIDs. See the below table for that and additional related information for some of the supported games.

Note:Be sure to write down the commands you used when installing the game server! You will need to issue those commands again whenever the game is updated.

Dedicated Server Information
Game	AppID	Mod Directory	Notes
Day of Defeat: Source	`232290`	`dod`
Team Fortress 2	`232250`	`tf`
Counter-Strike: Source	`232330`	`cstrike`
Counter-Strike: Global Offensive	`740`	`csgo`	As of 1.38.5.2 (2023-02-02), servers running under Linux will need to have a relatively modern libstdc++ installed. See this mailing list entry for further details. See the current state of Counter-Strike 2 here.
Left 4 Dead	`222840`	`left4dead`	This is the one first-party game that requires a custom VDF file for Metamod:Source.
Left 4 Dead 2	`222860`	`left4dead2`
Half-Life 2: Deathmatch	`232370`	`hl2mp`
No More Room in Hell	`317670`	`nmrih`
Zombie Panic! Source	`17505`	`zps`
Pirates, Vikings & Knights II	`17575`	`pvkii`

For post-install server configuration, take a look at the Game Server Configuration page.

Installing Metamod:Source

Before you can install SourceMod on your server, you must first download and install Metamod:Source. Metamod:Source (MM:S) acts as a middleware for different Source Engine games, providing a unified interface for plugins to operate on the game.

SourceMod itself is an MM:S plugin.

Download Metamod:Source. In most cases, you want a stable release. Use the download package according to your server's operating system.
- If the latest download is unavailable, go down the "Latest 20 Builds" until you get to one that is.
- Again, make sure you're downloading the correct package for your server; if you're using a hosted instance, it may not be using the same operating system as your personal desktop.
Copy the contents of the archive into your game's mod directory (one level below srcds.exe or srcds_run; the mod directory should contain steam.inf).
- You may need to extract the archive on, or upload the contents to a remote server.
  - If you are on Windows, the recommended software to use for extracting Linux (.tar.gz) archives is 7-zip; to upload files remotely via FTP, use WinSCP.
  - If you are using a GSP, refer to their control panel. Most provide FTP access, and some also allow for uploads directly via browser.
  - You should verify that the files were transmitted properly to the server; there have been reports of upload failures, zero-length files, and files that were mistakenly sent in text form and corrupted as a result.
After installing, you should verify that the installation was successful by starting your server and running meta version. It should be treated as a known command at this stage.
- Most games should work without further configuration, but if you find that MM:S isn't loading, you will want to generate a custom VDF file. Known games that require custom VDF files are:
  - Left 4 Dead 1
  - Third-party mods using the Source SDK base
- Metamod:Source is known to fail to load on CS:GO servers running under Linux by default. You will want to delete bin/libgcc_s.so.1 relative to the installation directory, plus read the information in the next bullet point.
- If you are using a Linux server you have full control over, read over the Platform-specific setup information.
- Additional diagnostic information about load failures is available under metamod-fatal.log.

Note:On server startup, you may see an error message Unable to load plugin "addons/metamod/bin/${platform}64/server". This is normal behavior; the game server will always attempt to load both 32-bit and 64-bit binaries and fail on the one that doesn't match. If you're sure that you're not running a 64-bit game server instance, you can delete addons/metamod_x64.vdf to only load the 32-bit version, or the other way around.

Installing SourceMod

The following is mostly lifted from the Installing SourceMod page.

Download SourceMod. Same as before; latest available stable release for your server's operating system.
Copy the contents of the archive into your game's mod directory (one level below srcds.exe or srcds_run; the mod directory should contain steam.inf).

If you plan on creating new plugins, you will also want to download SourceMod for your desktop operating system and extract the addons/sourcemod/scripting/ folder to a location on your computer.

In the future, you may need to follow these instructions to upgrade SourceMod on your server because of:

game updates requiring SourceMod to be rebuilt against a new revision of the Source SDK
plugins compiled against newer versions of SourceMod to take advantage of added functionality

Picking an IDE

Now that you have the dedicated game server, Metamod:Source, and SourceMod installed, you have most of the tools you need.

If you've never done any programming, you'll need a text editor. It's completely possible to write code in plain old Notepad and invoke the compiler directly, but having a proper development environment makes it much easier to work with code.

The following editors are known to have good support for SourceMod plugins:

Spider — recommended when starting out due to it being zero-install; once you are doing more than one-off plugins, move on to one of the non-web text editors
Visual Studio Code (VSCode) — an increasingly popular choice combined with Sarrus's VSCode extension (source code)
BasicPawn
Notepad++
SPEdit
Sublime Text

For more details on each editor and, if necessary, how to set it up for writing SourceMod plugins, look at the Development Environments section of the guide.

Once you've settled on a development environment, you can start learning how to create plugins — head over to the Basics section of the guide to get started.

@@ Line 9: / Line 9: @@
 = Installing the Server =
-{{note|While officially unsupported, SourceMod may be loaded on a game client (the game you launch); the server a game client creates is known as a listen server. However, there are many behavioral quirks that can only be reproduced on a listen server. It's highly recommended to stick to installing SourceMod on dedicated game server instances to ensure that any plugins you write will have the correct behavior.}}
+{{note|<p>While officially unsupported, SourceMod may be loaded on a game client (the game you launch); the server a game client creates is known as a listen server. However, there are many behavioral quirks that can only be reproduced on a listen server, and you likely won't receive any solutions to those issues that aren't "use a dedicated server".</p>
+<p>This guide does not provide instructions to load SourceMod on a game client. It's highly recommended to stick to installing SourceMod on dedicated game server instances to ensure that any plugins you write will have the correct behavior.</p>}}
 To install the dedicated server software for the game of your choice, we will use <code>steamcmd</code>. If a game server provider (GSP) is hosting the server for you, skip this step as your provider has already provided you with an installation; if you are using a self-hosted game server management panel, refer to the instructions for your software of choice to install your game server in place of this step.
@@ Line 15: / Line 17: @@
 <code>steamcmd</code> is Valve's command-line Steam client. It is used to install and update dedicated game servers.
-Refer to the [https://developer.valvesoftware.com/wiki/SteamCMD SteamCMD] section in the Valve Developer Wiki for download instructions. This varies on the operating system you're running the software on; you can either work on your own desktop or have a hosted (physical or virtual) machine off-premises.
+Refer to [https://developer.valvesoftware.com/wiki/SteamCMD the SteamCMD entry] in the Valve Developer Wiki for download instructions. This varies on the operating system you're running the software on; you can either work on your own desktop or have a hosted (physical or virtual) machine off-premises.
+Once <code>steamcmd</code> is extracted, you will need to install a game server. Continue reading the above wiki page to [https://developer.valvesoftware.com/wiki/SteamCMD#Running_SteamCMD run the application], [https://developer.valvesoftware.com/wiki/SteamCMD#SteamCMD_Login sign in (anonymously)], and [https://developer.valvesoftware.com/wiki/SteamCMD#Downloading_an_App download your game server].
-Once <code>steamcmd</code> is extracted, you will need to install a game. Continue reading the above wiki page to run the application, sign in (anonymously), and download your game server.
+You will need the AppID of the game's dedicated server to install it; note that it is different from the game client AppIDs.  See the below table for that and additional related information for some of the supported games.
-For your convenience, the following dedicated Source servers use the given Steam AppIDs (note that they are different from the game client AppIDs):
+{{note|Be sure to write down the commands you used when installing the game server!  You will need to issue those commands again whenever the game is updated.}}
-* Day of Defeat: Source: <code>232290</code>
+{| class="wikitable"
-* Team Fortress 2: <code>232250</code>
+|+ Dedicated Server Information
-* Counter-Strike: Source: <code>232330</code>
+|-
-* Counter-Strike: Global Offensive: <code>740</code>
+! Game
-* Left 4 Dead: <code>222840</code>
+! AppID
-* Left 4 Dead 2: <code>222860</code>
+! Mod Directory
-* Half-Life 2: Deathmatch: <code>232370</code>
+! Notes
-* No More Room in Hell: <code>317670</code>
+|-
-* Zombie Panic! Source: <code>17505</code>
+| Day of Defeat: Source
-* Pirates, Vikings & Knights II: <code>17575</code>
+| <code>232290</code>
+| <code>dod</code>
+|-
+| Team Fortress 2
+| <code>232250</code>
+| <code>tf</code>
+|-
+| Counter-Strike: Source
+| <code>232330</code>
+| <code>cstrike</code>
+|-
+| Counter-Strike: Global Offensive
+| <code>740</code>
+| <code>csgo</code>
+|
+* As of 1.38.5.2 (2023-02-02), servers running under Linux will need to have a relatively modern libstdc++ installed.  [https://www.mail-archive.com/[email protected]/msg14291.html See this mailing list entry for further details.]
+* [[Introduction to SourceMod Plugins#Will SourceMod support Source 2? Will plugins for existing games continue to work if they are ported?|See the current state of Counter-Strike 2 here.]]
+|-
+| Left 4 Dead
+| <code>222840</code>
+| <code>left4dead</code>
+|
+* This is the one first-party game that requires a [https://www.metamodsource.net/?go=vdf custom VDF file for Metamod:Source].
+|-
+| Left 4 Dead 2
+| <code>222860</code>
+| <code>left4dead2</code>
+|-
+| Half-Life 2: Deathmatch
+| <code>232370</code>
+| <code>hl2mp</code>
+|-
+| No More Room in Hell
+| <code>317670</code>
+| <code>nmrih</code>
+|-
+| Zombie Panic! Source
+| <code>17505</code>
+| <code>zps</code>
+|-
+| Pirates, Vikings & Knights II
+| <code>17575</code>
+| <code>pvkii</code>
+|}
 For post-install server configuration, take a look at the [[../Game Server Configuration|Game Server Configuration]] page.
@@ Line 44: / Line 91: @@
 #* Again, make sure you're downloading the correct package for your server; if you're using a hosted instance, it may not be using the same operating system as your personal desktop.
 # Copy the contents of the archive into your game's mod directory (one level below <code>srcds.exe</code> or <code>srcds_run</code>; the mod directory should contain <code>steam.inf</code>).
-#*You may need to extract the archive on, or upload the contents to a remote server.
+#* You may need to extract the archive on, or upload the contents to a remote server.
-#**If you are on Windows, the recommended software to use for extracting Linux (<tt>.tar.gz</tt>) archives is [https://www.7-zip.org/download.html 7-zip]; to upload files remotely via FTP, use [https://winscp.net/eng/index.php WinSCP].
+#** If you are on Windows, the recommended software to use for extracting Linux (<tt>.tar.gz</tt>) archives is [https://www.7-zip.org/download.html 7-zip]; to upload files remotely via FTP, use [https://winscp.net/eng/index.php WinSCP].
-#**If you are using a GSP, refer to their control panel.  Most provide FTP access, and some also allow for uploads directly via browser.
+#** If you are using a GSP, refer to their control panel.  Most provide FTP access, and some also allow for uploads directly via browser.
+#** You should verify that the files were transmitted properly to the server; there have been reports of upload failures, zero-length files, and files that were mistakenly sent in text form and corrupted as a result.
+# After installing, you should verify that the installation was successful by starting your server and running <tt>meta version</tt>.  It should be treated as a known command at this stage.
 #* Most games should work without further configuration, but if you find that MM:S isn't loading, you will want to [https://www.metamodsource.net/?go=vdf generate a custom VDF file].  Known games that require custom VDF files are:
 #** Left 4 Dead 1
@@ Line 52: / Line 101: @@
 #* Metamod:Source is known to fail to load on CS:GO servers running under Linux by default.  You will want to delete <tt>bin/libgcc_s.so.1</tt> relative to the installation directory, plus read the information in the next bullet point.
 #* If you are using a Linux server you have full control over, read over the [[User:Nosoop/Guide/Game Server Configuration#Platform-specific|Platform-specific setup]] information.
+#* Additional diagnostic information about load failures is available under <tt>metamod-fatal.log</tt>.
 {{Note|On server startup, you may see an error message <tt>Unable to load plugin "addons/metamod/bin/${platform}64/server"</tt>.  This is normal behavior; the game server will always attempt to load both 32-bit and 64-bit binaries and fail on the one that doesn't match.  If you're sure that you're not running a 64-bit game server instance, you can delete <tt>addons/metamod_x64.vdf</tt> to only load the 32-bit version, or the other way around.}}
@@ Line 76: / Line 126: @@
 The following editors are known to have good support for SourceMod plugins:
-* Spider (highly recommended when starting out due to it being zero-install; once you have multiple projects, move on to one of the non-web text editors)
+* Spider &mdash; recommended when starting out due to it being zero-install; once you are doing more than one-off plugins, move on to one of the non-web text editors
+* Visual Studio Code (VSCode) &mdash; an increasingly popular choice combined with [https://marketplace.visualstudio.com/items?itemName=Sarrus.sourcepawn-vscode Sarrus's VSCode extension] [https://github.com/Sarrus1/sourcepawn-vscode (source code)]
 * BasicPawn
 * Notepad++
 * SPEdit
-* Sublime Text 3
+* Sublime Text
-* Visual Studio Code (VSCode)
 For more details on each editor and, if necessary, how to set it up for writing SourceMod plugins, look at the [[../Development Environments|Development Environments]] section of the guide.
 Once you've settled on a development environment, you can start learning how to create plugins &mdash; head over to the [[../Basics|Basics]] section of the guide to get started.

Difference between revisions of "User:Nosoop/Guide/Setup"

Latest revision as of 16:35, 27 April 2024

Contents

Installing the Server

Installing Metamod:Source

Installing SourceMod

Picking an IDE

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools